172
Paper type Plain paper label / matte paper label:
Form Fanfold paper
Backing paper width 50 to 112 mm
Label width 46 to 108 mm
Label length 8 to 301.8 mm
Gap between labels 3 to 6 mm
Waste part on the left and right 2 ± 0.5 mm
Waste width 1.5 mm or more
Label corner R 1.5 mm or less
Black mark width 13 mm or more
Black mark length 4 mm or more (margin part 4 mm or more)
Black mark center position 8.5 ± 1 mm
Black mark interval 11 to 304.8 mm
Paper thickness 0.161 to 0.164 mm
Perforated line interval 203.2 to 304.8 mm
Perforated line form Plain paper label: 1 mm uncut, 5 mm cut
Matte paper label: 1 mm uncut, 5 mm cut
Number of folds 500 or less
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
