ETAS ES910.3-A - Figures

ES910.3-A - User’s Guide 111
ETAS Figures
Figures
Fig. 3-1 ES910.3-A View of the Device .................................................................... 18
Fig. 3-2 ES910.3-A Front Panel ................................................................................ 19
Fig. 3-3 ES910.3-A Back Panel................................................................................. 20
Fig. 3-4 Flash Codes of the Indicators ...................................................................... 21
Fig. 4-1 Block Diagram of the ES910.3-A................................................................. 25
Fig. 4-2 “Wake-Up” Function.................................................................................. 26
Fig. 4-3 Operational States of the Power Supply (Simplified) .................................... 27
Fig. 4-4 “Manual Trigger” Function with Button between Pin 1 and Pin 2 ............... 28
Fig. 4-5 “Manual Trigger” Function with Terminal 15.............................................. 29
Fig. 4-6 Connecting the Wake Up Pin to Terminal 15 .............................................. 29
Fig. 4-7 Power Supply at the LIN Bus ....................................................................... 32
Fig. 4-8 Operation with external switch and iLinkRT
TM
at the ECU interface ............. 38
Fig. 5-1 Free Space around the ES910.3-A ............................................................. 43
Fig. 5-2 Levering Off the Plastic Foot ....................................................................... 44
Fig. 5-3 Tapped blind hole ..................................................................................... 45
Fig. 5-4 Connecting the ES910.3-A to Another Module........................................... 46
Fig. 5-5 ETK Bypass System with ES910.3-A............................................................. 47
Fig. 5-6 ETK Bypass System with ES910.3-A............................................................. 48
Fig. 5-7 ETK Bypass System with ES910.3-A............................................................. 49
Fig. 5-8 ETK Bypass System with Simultaneous Measuring and Calibration .............. 50
Fig. 5-9 ETK Bypass System with Daisy Chain Modules............................................. 51
Fig. 5-10 ETK Bypass System with ES720 Drive Recorder and Daisy Chain Modules.... 53
Fig. 5-11 Test Bench System with ECU access in real-time.......................................... 55
Fig. 7-1 WEEE symbol.............................................................................................. 76
Fig. 7-2 Power Supply Interface (7-29V DC) ............................................................. 87
Fig. 7-3 PC Interface (PC)......................................................................................... 88
Fig. 7-4 CAN/LIN Interface (CAN1/LIN1 and CAN2/LIN2) .......................................... 89
Fig. 7-5 ETK Interface (ETK) ..................................................................................... 90