ETAS ES910.3-A - Cleaning the Product; Environmental Conditions; Fulfilled Standards and Norms; Maintenance of the Product

ES910.3-A - User’s Guide 75
ETAS Technical Data
7.1.2 Fulfilled Standards and Norms
The module adheres to the following standards and norms:
The module is designed only for use in industrial environments in accordance
with EN 61000-6-4. When using the module outside of industrial environments
avoid possible radio disturbances by additional shielding measures!
7.1.3 Environmental Conditions
7.1.4 Maintenance of the Product
Do not open or change the module housing! Work on the module housing may
be performed only by qualified technical personnel. Return defective modules to
ETAS for repair.
7.1.5 Cleaning the Product
We recommend cleaning the product with a dry cloth.
Norm Test
EN 61326 Electrical equipment for measurement,
control and laboratory use - EMC
requirements
EN 61000-6-2 Immunity (industrial environments)
EN 61000-6-4 Emission standard (industrial environ-
ments)
WARNING!
This is a class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to
take adequate measures.
Operating temperature range -40 °C to +50 °C
-40 °F to +122 °F
Storage temperature range 
(module without packaging)
-40 °C to +85 °C
-40 °F to +185 °F
Relative humidity (non-condensing) 0 to 95%
Operating altitude max. 5,000 m / 16,400 ft
Degree of protection IP30
Contamination level 2 (acc. to IEC 60664-1 and IEC 61010-1)
Note
The module is suitable for use in interiors, in the passenger cell or in the trunk
of vehicles. The module is not suitable for installation in the engine compart-
ment and similar environments.