ETAS ES910.3-A - Housing; Fig. 3-1 ES910.3-A View of the Device

ES910.3-A - User’s Guide 18
ETAS Hardware Description
3.2 Housing
Standard housing with interfaces on the front and rear of the device is used for
the ES910.3-A. The sturdy metal housing of the ES910.3-A has nonskid plastic
feet.
It can be easily screwed onto a carrier system for installation in a vehicle or in the
lab. The housings of this device family can also quickly and easily be connected
to one another (see the chapter "Setup" on page 42).
The ES910.3-A is specifically designed to be installed in the passenger cell.
Fig. 3-1 ES910.3-A View of the Device