ETAS ES910.3-A - Supported Applications and Software Requirements

ES910.3-A - User’s Guide 78
ETAS Technical Data
7.6.2 Supported Applications and Software Requirements
The ES910.3-A is supported by HSP V8.0.0 and higher. RTA-Trace V2.1 controls the interaction of the tasks of the ES910.3-A realtime
operating system at runtime. Software in the following versions is required to configure and control the ES910.3-A and for data acquisition
purposes.
Note
The supported applications and software versions displayed in the table apply exclusively to the ES910.3-A module described in this user's
guide.
Interface Application Classification
1)
HSP Support in Application Software
ES910.3-A INCA
2)
INCA-MCE INTECRIO ASCET-RP
CAN CAN IO RP V8.0 no no V3.1.1 V6.1
XCP on CAN Bypass RP V8.0 no no V3.1.1 V6.1
CAN Monitoring MC V8.0 V6.2.1
3)
no no no
CCP MC V8.0 V6.2.1
3)
no no no
CCP MCE V9.4 V7.0.0 V1.0 no no
CAN Output MC V8.0 V6.2.1
3)
no no no
XCP on CAN MC MC V8.0 V6.2.1
3)
no no no
XCP on CAN MCE MCE V9.4 V7.0.0 V1.0 no no
KWP2000 MC V8.0 V6.2.1
3)
no no no
UDS MC V8.0 V6.2.1
3)
no no no
LIN LIN IO RP V8.0 no no V3.1.1 V6.1
LIN Monitoring MC V8.1 V6.2.1
4)
no V3.1.1 V6.1