ETAS ES910.3-A - Page 79

ES910.3-A - User’s Guide79
Technical Data ETAS
ETK ETK Measurement and Calibration MC V8.0 V6.2.1
3)
no no no
ETK MCE MCE V9.4 V7.0.0 V1.0 no no
ETK Bypass RP V8.0 no no V3.1.1 V6.1
ECU XCP on UDP RP V8.0 no no V3.1.1 V6.1
XETK Measurement and Calibration MC V8.0 V6.2.1
3)
no no no
XETK MCE MCE V10.0
5)
V7.1.0
5
V2.0
5)
no no
XETK Bypass RP V8.0 no no V3.1.1 V6.1
iLinkRT RP V9.4 V7.0.0 no V3.1.1 V6.1
SP Service Port RP V8.0 no no V3.1.1 V6.1
IO ES4xx/ES63x modules RP V9.4 no no V3.1.1 V6.1
ES930 modules RP V9.4 no V1.0 V4.0.0 V6.1.3
EtherCAT MCE V9.4 V7.0.0 V1.0 no no

1)
: RP: Rapid Prototyping, MC: Measurement and Calibration, MCE: Measurement and Calibration Embedded
2)
: INCA/INCA-EIP: Measurement access via INCA-EIP (ab V6.2.1 and higher) to signals/ Rapid prototyping model values of the RP model
3)
: INCA V6.2.1 with Hotfix 7 and additionally INCA-ES9xx Add-On V6.2.1 and higher
4)
: INCA V6.2.1 with Hotfix 13 and additionally INCA-ES9xx Add-On V6.2.2 and INCA-LIN Add-On V6.2.3 and higher
5)
: planned
Note
Please observe the notes about supported ETK types and their use for bypass applications in chapter 7.7.6 on page 83.
Interface Application Classification
1)
HSP Support in Application Software
ES910.3-A INCA
2)
INCA-MCE INTECRIO ASCET-RP