ES910.3-A - User’s Guide 59
ETAS Getting Started
• Find out more about how to proceed when wiring
the Daisy Chain modules in the relevant User’s
Guide.
"EtherCAT" Operating Mode
The cable for connecting the EtherCAT bus to the IO interface of the ES910.3-A
module will be provided by ETAS Engineering upon request. Cable lengths of up
to 30 m can be supplied.
5.5.4 ECU Interface (ECU)
The ECU interface and the test bench computer with iLinkRT
TM
interface are con-
nected with the CBE200 cable.
To Next Page
Loading...
