ETAS ES910.3-A - Configuring the ES910.3-A

ES910.3-A - User’s Guide 60
ETAS Getting Started
5.6 Configuring the ES910.3-A
The ES910.3-A is configured by the ON/AUTO switch and at the PC via a graphic
user interface. A web browser application is used as an interface.
5.6.1 Web Interface
The web interface of the ES910.3-A consists of a home page, a page for custom-
ized configuration of the interfaces for the "Wake Up" function and other pages
with information on the status of the ES910.3-A.
5.6.2 Launching the ES910.3-A Web Interface
To launch the ES910.3-A web interface:
• Connect the ES910.3-A to the PC.
• Start the HSP program on the PC.
• Click Hardware Search.
• Highlight the ES910.3-A to be configured in the
“Hardware” window.
• Right-click System Configuration.
The default web browser launches the web inter-
face for configuring the ES910.3-A with the current
IP address of the module in the address field.
The home page of the ES910.3-A web interface is
displayed.
5.6.3 Configuring the “Wake Up” Function
To configure the “Wake Up” function:
• Start the ES910.3-A web interface (see chapter
5.6.2 on page 60).
• Click Device Configuration.
• Click Wake Up.
The page for configuring the “Wake Up” function
is displayed.
• Configure the interfaces of the ES910.3-A for the
“Wake Up” function.
Note
After changing a configuration on the web interface of ES910.3-A, the module
has to be restarted!
Note
After changing a configuration on the web interface of ES910.3-A, the module
has to be restarted!