6 Setup 95
Grandmasters, submasters, and playbacks may appear on more than one fader page.
In a partitioned control environment, the mapping of the faders (with the exception of the master
fader) is global.
Master fader pair
It is possible to map the master fader pair as well. This will allow separate users to have different
lists loaded to the master fader pair. The default mapping for the pair is 0.
Note:
Specifying a {Mapped to} location does not specify the cue list that will be loaded
to that playback. Cue lists can be assigned to any playback. {Mapped to}
establishes the order in which faders will be loaded.
Whatever playbacks are mapped to “1”, they will auto-load with the first recorded
cue list. Any playback mapped to 5 will auto-load with the fifth recorded cue list,
and so on.
To Next Page
Loading...
