evertz 3025SW - Figure 7-1: EMC-Setup DVE Manager

3025SW Master Control Switching & Channel Branding
Page 134 Revision 1.0
Figure 7-1: EMC-Setup DVE Manager
The choices available to select in this window are:
New: Create a new DVE move.
Delete: Delete the selected DVE move.
Edit: Edit the selected DVE move.
Copy: Copy the selected DVE move.
Save: Save the DVE moves to an external file located on the PC that will have a .dve
extension.
Load: Load the DVE moves from an external file located on the PC that have a .dve extension.