evertz 3025SW - Markets Configuration

3025SW Master Control Switching & Channel Branding
Revision 1.0 Page 147
Dolby Encoder Off
Not Supported
Dolby Encoder Level On
Not Supported
Dolby Encoder Level Off
Not Supported
GPO Trigger
Trigger an EMC GPO.
EMC GPO must be
configured as “GPO
SYSTEM EVENT”.
Parameter 1 is always 4
and Parameter 2 is the
active length in frames.
GPO Number
None.
Dolby Encoder Auto On
Not Supported
Dolby Encoder Auto Off
Not Supported.
Soft Reset
Perform a soft reset of the
channel from the panel.
Must be in Emergency
Mode OR Just do it with no
safeguard.
None
Run GPI Script
Run a pre-configured GPI
script
Open 1-15 or Closed 1-15
None
UDX Level ON
Not Supported.
UDX Level OFF
Not Supported.
UDX On-Air
Not Supported.
UDX Off-Air
Not Supported.
Table 7-3: Macro Events
7.4. MARKETS
The 3025SW offers a feature called Markets. This feature is typically used in multi-channel systems to
group similar channels together. Markets allow the user to control multiple channels at once. This is
useful for manually operating a simulcast.

Note: Automation systems can NOT control markets. Markets are only available
for manual operation.
7.4.1. System Markets
To create or edit Markets, the user selects the Markets button on the main EMC-Setup page. The
System Market window will open up.