EXFO Power Blazer - Page 37

Physical Interfaces and LEDs
Power Blazer 27
Port Availability per Module
88400NGE / 88460 and Transceiver Systems
The following table shows the list of available ports as well as a description
and the signals supported on the module.
The following table shows the list of transceiver system supported on the
88460 module as well as a description and the signals supported.
Port
Labelled
Description Supported Signal(s) 88400NGE 88460
a
a. Without TA4 transceiver systems.
SFP28
b
b. Future use.
Optical IN/OUT port SFP28
transceiver
Ethernet 100/1000 Mbit/s,
10 Gbit/s, 25 Gbit/s optical
X -
SFP56
b
Optical IN/OUT port SFP56
transceiver
Ethernet 50 Gbit/s X -
QSFP28
(P1, P2, P3, P4)
Optical IN/OUT port QSFP28
transceiver
Ethernet 40 Gbit/s
b
, 100 Gbit/s
100G FlexO-1-RS
X X
CFP8 Optical IN/OUT port CFP8
transceiver
Ethernet 400 Gbit/s X -
REF OUT Electrical port SMA for eye
diagram clock signal generation
X X
EXT CLK
b
Electrical port SMB for external
clock synchronization
DS1/1.5M, E1/2M, 2MHz, 1PPS X X
Transceiver
System
Description Supported Signal(s)
TA4-CFP8 Optical IN/OUT port CFP8
transceiver
400 Gbit/s Ethernet
TA4-OSFP Optical IN/OUT port OSFP
transceiver
400 Gbit/s Ethernet
TA4-QSFP-DD Optical IN/OUT port
QSFP56-DD/QSFP56
transceiver
400 Gbit/s Ethernet (QSFP56-DD)
200 Gbit/s Ethernet (QSFP56)