Festo SPC200 - Page 138

4. Commissioning positioning systems
4−24
Festo P.BE−SPC200−WIN−PISA−CD−EN en 0901d
Cylinder length/
Cylinder swivel angle
The length or swivel range of the drive (see type plate).
Permitted: 50 ... 10000 [mm] or [°]
Cylinder diameter The diameter of the drive used (see type plate).
Measuring system
design
Design of the measuring system. Select here the type of
measurement system used from the list:
 potentiometer
 temposonics (digital
measuring system)
 encoder
(the measuring system length is defined fixed with the
selection Encoder")
Measuring system length/
Measuring system swivel
angle
The length or swivel range of the measuring system used
(see type plate).
Permitted: 50 ... 10000 [mm] or [°]
Measuring system
parameter
This parameter is only displayed in the Encoder" setting of
the Measuring system
design" field. The setting is reserved
for later developments.
Valve type Identification of the valve. Here select the type of valve used
from the list:
 MPYE−5−M5−010B
 MPYE−5−1/8−LF−010B
 MPYE−5−1/8−HF−010B
 MPYE−5−1/4−010B
 MPYE−5−3/8−010B