6. Diagnostics and optimization
6−54
Festo P.BE−SPC200−WIN−PISA−CD−EN en 0901d
6.6.6 User−defined graphs
If you frequently have to create the same graph for different
measurements, you can define it as a user−defined graph".
The following settings in the graph will then be saved:
database
axis attributes
curve attributes.
If you call a user−defined graph, a new graph with the settings
defined under Data base" will be created
on the basis of the
current measured values.
User−defined graphs always refer to the number of the tab
under Existing measurement data" in the Data base"
dialogue window. User−defined graphs referring to tab [0]"
are always based on the current Online measurement data.
Graphs referring to tab [1]" are based on the measurement
value
file first opened, etc.
1. Make sure that the graphic window is the active window.
2. Select [Establish as user def. graphic] from the [Graphic]
menu.
3. Enter a name for the user−defined graph in the New
menu entry" field of the User−defined graphic" dialogue
window.
4. Click OK" to confirm your entry.
The user−defined graph is now saved
and will be shown in the
[Graphic] [User defined] menu.
To Next Page
Loading...
