Festo SPC200 - Documentation on the SPC200 Smart Positioning Controller

Contents and general instructions
XXII
Festo P.BE−SPC200−WIN−PISA−CD−EN en 0901d
Documentation on the SPC200 Smart Positioning Controller
This manual contains general basic information on commis
sioning, programming and diagnosing the SPC200 with the
WinPISA software package.
Extension modules are available for coupling to field bus
systems and electric axes. Special information on this can be
found in the manual for the relevant module.
Information on the functioning, fitting, installation and com
missioning of pneumatic axes with the SPC200 can be found
in the system manual for the SPC200.
Type
Title Contents
System manual SPC200 Smart Positioning Controller,
user manual type P.BE−SPC200−...
Installing, commissioning and
diagnosing pneumatic axes with the
SPC200; standard components and
modules
Software manual Software package WinPISA
type P.SW−WIN−PISA−...
Functions of the WinPISA software
package
Help system Help system for WinPISA
(contained in WinPISA)
WinPISA help system
Manuals Field bus module
type P.BE−SPC200−...−...
Installing, commissioning and
diagnosing the relevant field bus
module
Stepping motor module
type P.BE−SPC200−SMX−1−...
Installing, commissioning and
diagnosing with a stepping motor
Information on the pneumatic components can be found in
the operating instructions supplied with the product.