2. Project management
2−22
Festo P.BE−SPC200−WIN−PISA−CD−EN en 0901d
2.2.2 Editing software
You can manage the NC programs and the position list of the
positioning system in the software range.
Depending on the requirements and task of the posi−tioning
system, you can create up to 100 NC programs (no. 0 to 99).
A position list is an integral part of each project and must not
therefore be created.
Further information on editing the software can be found in
chapter5.
To insert an NC program (user program) into the current
project:
1. Select the Software icon in the project window by clicking
on it or moving the selection to the icon using the ARROW
KEYS.
2. Select the command [Insert object] from the
[Edit] menu.
The New program" dialogue window will open.
3. Enter a program title in the Title" field and a program
number in the Program no." field of the New program"
dialogue window. Note that a program number must be
unique within a project.
You can enter a program description or an explanatory
text for
the program (max. 128 characters) in the
Description" field.
To Next Page
Loading...
