2. Project management
2−21
Festo P.BE−SPC200−WIN−PISA−CD−EN en 0901d
Removing hardware components
To remove a hardware component from the current project:
1. Select the icon of the hardware component in the project
window by clicking on it or by moving the selection to the
icon using the ARROW KEYS.
2. Select the command [Deleteobject] from the [Edit] menu.
Please note
When you delete an SPC200, the relevant axes and I/O
modules with all the settings will be deleted as well.
3. Confirm the hardware deletion prompt with Yes" to de
lete the component. Select No" to keep the hardware
component in the project.
To Next Page
Loading...
