The abridgements in braces “[ ]” can be entered instead of complete name. If group has
been entered without subgroup definitions, all subgroups will become available. To
define subgroup, type it after group name with “:” in the beginning of a subgroup. The
WEB interface will follow the rights of CLI interface
Examples:
USER TESTUSER + S:LINK,LANC add privileges to show LINK status, LAN status and to clear
LAN statistics for the TESTUSER (it should be created firstly)
USER TESTUSER - S:LANC remove privileges to clear LAN statistics for the TESTUSER
USER TESTUSER + CONFIG add privileges to change configuration for the TESTUSER
Access Control
All listed users have local access to CLI via RS232 interface. The remote access through Telnet
and WEB can be granted from anywhere, from selected IP addresses, or canceled.
To Next Page
Loading...
