Fortinet MR1 - Ip Igmp Snooping Mrouter

102
ip igmp snooping mrouter
This command configures a selected interface as a multicast router interface. When
configured as a multicast router interface, the interface is treated as a multicast router
interface in all VLANs.
Syntax
ip igmp snooping mrouter interface
no ip igmp snooping mrouter interface
no - This command disables the status of the interface as a statically configured multicast router
interface.
Default Setting
Disabled
Command Mode
Interface Config.
This command configures the VLAN ID(<vlanId>) that has the multicast router mode
enabled.
Syntax
ip igmp snooping mrouter <vlanId>
no set igmp snooping mrouter <vlanId>
<vlanId> - VLAN ID.
no - This command disables the status of the interface as a statically configured multicast router
interface.
Default Setting
Disabled