Fortinet MR1 - Port Security Configuration Commands; Port-Security; Tacacs Timeout

222
Default Setting
5
Command Mode
Global Config
5.8.5.7 tacacs timeout
This command is used to configure the TACACS request timeout of an instance.
Syntax
tacacs timeout <1-3> <1-255>
no tacacs timeout <1-3>
<1-255> - max timeout (Range: 1 to 255).
<1-3> - The valid value of index is 1, 2, and 3.
no - This command is used to reset the timeout value to the default value.
Default Setting
3
Command Mode
Global Config
5.8.6 Port Security Configuration Commands
5.8.6.1 port-security
This command enables port locking at the system level (Global Config) or port level
(Interface Config).
Syntax