Fortinet MR1 - Redistribute; Router-ID

345
6.3.2.35 router-id
This command sets a 4-digit dotted-decimal number uniquely identifying the router ospf id.
Syntax
router-id <ipaddress>
< ipaddress > - IP Address.
Default Setting
None.
Command Mode
Router OSPF Config
6.3.2.36 redistribute
This command configures OSPF protocol to redistribute routes from the specified source
protocol/routers.
Syntax
redistribute {rip | static | connected} [metric <0-16777215>] [metric-type {1 | 2}] [tag
<0-4294967295>] [subnets]
no redistribute {rip | static | connected} [metric] [metric-type] [tag] [subnets]
<0-16777215> - The range of metric is 0 to 16777215.
<0-4294967295> - The range of tag is 0 to 4294967295.
Default Setting
The default value of metric is unspecified. The default value of metric type is 2. The default value of tag is
0.
Command Mode
Router OSPF Config