587
Resetting All RADIUS Statistics Page
Command Buttons
Clear All RADIUS Statistics - This button will clear the accounting server, authentication server, and
RADIUS statistics.
8.2.4.3 Defining TACACS Configuration
Configuring TACACS Configuration Page
Use this menu to configure the parameters for TACACS+, which is used to verify the login
user's authentication. Note that only a user with Read/Write access privileges may change
the data on this screen.
Configurable Data
Authen. State - TACACS+ administration mode which are Enable and Disable.
Server ID - The TACACS+ server index which are 1, 2, and 3.
Authen. Server - TACACS+ server IP address.
To Next Page
Loading...
