Fortinet MR1 - Ip Vrrp Ip; Ip Vrrp Mode

375
ip vrrp <1-255>
no ip vrrp <1-255>
<1-255> - The range of virtual router ID is 1 to 255.
<no> - This command removes all VRRP configuration details of the virtual router configured on a
specific interface.
Default Setting
None
Command Mode
Interface Config
6.9.2.2 ip vrrp ip
This commands also designates the configured virtual router IP address as a secondary IP
address on an interface.
Syntax
ip vrrp <1-255> ip <addr> [secondary]
no ip vrrp <1-255> ip <addr> [secondary]
<1-255> - The range of virtual router ID is 1 to 255.
<addr> - Secondary IP address of the router ID.
<no> - This command removes all VRRP configuration details of the virtual router configured on a
specific interface.
Default Setting
None
Command Mode
Interface Config
6.9.2.3 ip vrrp mode
This command enables the virtual router configured on the specified interface. Enabling the
status field starts a virtual router.