Fortinet MR1 - Area Nssa Default-Info-Originate; Area Nssa No-Redistribute

329
6.3.2.7 area nssa default-info-originate
This command configures the metric value and type for the default route advertised into the
NSSA.
Syntax
area <areaid> nssa default-info-originate [<1-16777215>] [{comparable |
non-comparable}]
<areaid> - Area ID.
<1-16777215> - The metric of the default route. The range is 1 to 16777215.
comparable - It's NSSA-External 1.
non-comparable - It's NSSA-External 2.
Default Setting
None
Command Mode
Router OSPF Config
6.3.2.8 area nssa no-redistribute
This command configures the NSSA ABR so that learned external routes will not be
redistributed to the NSSA.
Syntax
area <areaid> nssa no-redistribute
<areaid> - Area ID.
Default Setting
None
Command Mode
Router OSPF Config