Fortinet MR1 - 5 Switching Commands; System Information and Statistics Commands; Show Arp; Show Calendar

49
5 Switching Commands
5.1 System Information and Statistics
commands
5.1.1 show arp
This command displays connectivity between the switch and other devices. The Address
Resolution Protocol (ARP) cache identifies the MAC addresses of the IP stations
communicating with the switch.
Syntax
show arp
Default Setting
None
Command Mode
Privileged Exec
Display Message
MAC Address: A unicast MAC address for which the switch has forwarding and/or filtering information. The
format is 6 two-digit hexadecimal numbers that are separated by colons. For example: 00:23:45:67:89:AB
IP Address: The IP address assigned to each interface.
Interface: A valid slot number and a valid port number.
5.1.2 show calendar
This command displays the system clock.
Syntax