Fortinet MR1 - Show Ip Pimdm Neighbor; Configuration Commands; Ip Pimdm

408
Privileged Exec
Display Message
Interface: Valid slot and port number separated by a forward slash.
IP Address: This field indicates the IP Address that represents the PIM-DM interface.
Nbr Count: This field displays the neighbor count for the PIM-DM interface.
Hello Interval: This field indicates the time interval between two hello messages sent from the router on
the given interface.
Designated Router: This indicates the IP Address of the Designated Router for this interface.
7.4.1.4 show ip pimdm neighbor
This command displays the neighbor information for PIM-DM on the specified interface.
Syntax
show ip pimdm neighbor [<slot/port> | all]
< slot/port > - Interface number.
all - this command represents all interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Neighbor Addr: This field displays the IP Address of the neighbor on an interface.
Interface: Valid slot and port number separated by a forward slash.
Up Time: This field indicates the time since this neighbor has become active on this interface.
Expiry Time: This field indicates the expiry time of the neighbor on this interface.
7.4.2 Configuration Commands
7.4.2.1 ip pimdm
This command enables the administrative mode of PIM-DM in the router.