Fortinet MR1 - Show Ip Ospf Virtual-Link Brief

325
Syntax
show ip ospf virtual-link <areaid> <neighbor>
<areaid> - Area ID.
<neighbor> - Neighbor's router ID.
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Messages
Area ID The area id of the requested OSPF area.
Neighbor Router ID The input neighbor Router ID.
Hello Interval The configured hello interval for the OSPF virtual interface.
Dead Interval The configured dead interval for the OSPF virtual interface.
Iftransit Delay Interval The configured transit delay for the OSPF virtual interface.
Retransmit Interval The configured retransmit interval for the OSPF virtual interface.
State The OSPF Interface States are: down, loopback, waiting, point-to-point, designated
router, and backup designated router. This is the state of the OSPF interface.
Metric The metric value.
Neighbor State The neighbor state.
Authentication Type The configured authentication type of the OSPF virtual interface.
6.3.1.12 show ip ospf virtual-link brief
This command displays the OSPF Virtual Interface information for all areas in the system.
Syntax
show ip ospf virtual-link brief
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Messages
Area Id Is the area id of the requested OSPF area.