Fortinet MR1 - Default-Information Originate; Default-Metric

336
The default value of hello interval is 1 second.
Command Mode
Router OSPF Config
6.3.2.20 default-information originate
This command is used to control the advertisement of default routes.
Syntax
default-information originate [always] [metric <1-16777215>] [metric-type {1 | 2}]
no default-information originate [metric] [metric-type]
[always] - Sets the router advertise 0.0.0.0/0.0.0.0.
metric - The range of the metric is 1 to 16777215.
metric type - The value of metric type is type 1 or type 2.
<no> - This command configures the default advertisement of default routes.
Default Setting
None
Command Mode
Router OSPF Config
6.3.2.21 default-metric
This command is used to set a default for the metric of distributed routes.
Syntax
default-metric <1-16777215>
no default-metric