Fortinet MR1 - Channel-Group

112
Syntax
lacp
no lacp
no - This command disables Link Aggregation Control Protocol (LACP) on a port.
Default Setting
Enabled
Command Mode
Interface Config
This command enables Link Aggregation Control Protocol (LACP) on all ports.
Syntax
lacp all
no lacp all
all - All interfaces.
no - This command disables Link Aggregation Control Protocol (LACP) on all ports.
Default Setting
Enabled
Command Mode
Global Config
5.2.6.9 channel-group
This command adds one port to the port-channel (LAG). The first interface is a logical slot
and port number of a configured port-channel.