Fortinet MR1 - Tacacs; TACACS Configuration Commands; Tacacs Mode

219
5.8.5 TACACS Configuration Commands
5.8.5.1 tacacs
This command is used to enable /disable the TACACS function.
Syntax
tacacs
no tacacs
no - This command is used to disable the TACACS function.
Default Setting
Disabled
Command Mode
Global Config
5.8.5.2 tacacs mode
This command is used to enable/select/disable the TACACS server administrative mode
Syntax
tacacs mode <1-3> {master | slave}
no tacacs mode <1-3>
<1-3> - The valid value of index is 1, 2, and 3.
no - This command is used to disable it.
Default Setting
Disabled
Command Mode
Global Config