105
Syntax
set igmp maxresponse <1-3965> <1-3599>
no set igmp maxresponse <1-3965>
<1-3965> - VLAN ID (Range: 1 – 3965).
no - This command sets the IGMP maximum response time on a particular VLAN to the default value.
Default Setting
10
Command Mode
Vlan Database
set igmp mcrtexpiretime
This command sets the Multicast Router Present Expiration time on a particular VLAN. This
is the amount of time in seconds that a switch will wait for a query to be received on an
interface, which is participating in the VLAN, before the interface is removed from the list of
interfaces with multicast routers attached. The range is 0 to 3600 seconds. A value of 0
indicates an infinite time-out, i.e. no expiration.
Syntax
set igmp mcrtexpiretime <1-3965> <0-3600>
no set igmp mcrtexpiretime <1-3965>
<1-3965> - VLAN ID (Range: 1 – 3965).
<0-3600> - The range of the Multicat Router Present Expire time is 0 to 3600 seconds.
no - This command sets the IGMP Multicast Router Present Expire time on a particular VLAN to the
default value.
Default Setting
10
Command Mode
To Next Page
Loading...
Need help?
General