Fortinet MR1 - Show Storm-Control; Storm Control

114
Syntax
delete-channel-group <logical slot/port> all
<logical slot/port> - Port-Channel Interface number.
all - All members for specific Port-Channel.
Default Setting
None
Command Mode
Global Config
5.2.7 Storm Control
5.2.7.1 show storm-control
This command is used to display broadcast storm control information.
Syntax
show storm-control broadcast
Default Setting
None
Command Mode
Privileged Exec
Display Message
Intf: Displays interface number.
Mode: Displays status of storm control broadcast.
Level: Displays level for storm control broadcast.
Rate: Displays rate for storm control broadcast.