372
None
Command Mode
Privileged Exec, User Exec
Display Message
Admin Mode Displays the administrative mode for VRRP functionality on the switch.
Router Checksum Errors Represents the total number of VRRP packets received with an invalid VRRP
checksum value.
Router Version Errors Represents the total number of VRRP packets received with Unknown or
unsupported version number.
Router VRID Errors Represents the total number of VRRP packets received with invalid VRID for this
virtual router.
6.9.1.2 show ip vrrp brief
This command displays information about each virtual router configured on the switch.
Syntax
show ip vrrp brief
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Message
Interface Valid slot and port number separated by a forward slash.
VRID Represents the router ID of the virtual router.
IP Address Is the IP Address that was configured on the virtual router
Mode Represents whether the virtual router is enabled or disabled.
State Represents the state (Master/backup) of the virtual router.
6.9.1.3 show ip vrrp interface
This command displays all configuration information of a virtual router configured on a
specific interface. Note that the information will be displayed only when the IP address of the
specific interface is configured.
Syntax
show ip vrrp interface <slot/port> [ <vrid>]
<slot/port> - Valid slot and port number separated by a forward slash.
To Next Page
Loading...
Need help?
General