Fortinet MR1 - Clear Dot1 X Statistics; Clear Radius Statistics

243
clear ip filter
Default Setting
None
Command Mode
Privileged Exec
5.11.1.16 clear dot1x statistics
This command resets the 802.1x statistics for the specified port or for all ports.
Syntax
clear dot1x statistics {all | <slot/port>}
<slot/port> - is the desired interface number.
all - All interfaces.
Default Setting
None
Command Mode
Privileged Exec
5.11.1.17 clear radius statistics
This command is used to clear all RADIUS statistics.
Syntax
clear radius statistics
Default Setting