Fortinet MR1 - Queue Trust

294
None
Command Mode
Global Config.
5.14.2.3 queue trust
This command sets the class of service trust mode of an interface. The mode can be set to
trust one of the Dot1p (802.1p), IP Precedence.
Syntax
queue trust {dot1p | ip-precedence | ip-dscp}
no queue trust
no - This command sets the interface mode to untrusted.
Default Setting
None
Command Mode
Interface Config.
This command sets the class of service trust mode for all interfaces. The mode can be set to
trust one of the Dot1p (802.1p), IP Precedence.
Syntax
queue trust all {dot1p | ip-precedence | ip-dscp}
no queue trust all