Fortinet MR1 - Mtu; Show Ip Ipv6

127
5.3.1.3 show ip ipv6
This command displays the IPv6 forwarding status of all ports.
Syntax
show ip ipv6
Default Setting
None
Command Mode
Privileged Exec
Display Message
Intf: Interface number
Type: Status of each interface for IPv6.
5.3.1.4 mtu
This command sets the maximum transmission unit (MTU) size (in bytes) for physical and
port-channel (LAG) interfaces. For the standard implementation, the range of <1518-9216>
is a valid integer between 1518-9216.
Syntax
mtu <1518-9216>
no mtu
<1518-9216> - Max frame size (Range: 1518 - 9216).
no - This command sets the default maximum transmission unit (MTU) size (in bytes) for the interface.
Default Setting
1518
Command Mode
Interface Config