Fortinet MR1 - Area Nssa No-Summary; Area Nssa Translator-Role

330
6.3.2.9 area nssa no-summary
This command configures the NSSA so that summary LSAs are not advertised into the
NSSA
Syntax
area <areaid> nssa no- summary
<areaid> - Area ID.
Default Setting
None
Command Mode
Router OSPF Config
6.3.2.10 area nssa translator-role
This command configures the translator role of the NSSA.
Syntax
area <areaid> nssa translator-role {always | candidate}
<areaid> - Area ID.
always - A value of always will cause the router to assume the role of the translator when it becomes a
border router.
candidate - a value of candidate will cause the router to participate in the translator election process
when it attains border router status.
Default Setting
None
Command Mode
Router OSPF Config