90
This command enables GVRP (GARP VLAN Registration Protocol) for all ports.
Syntax
switchport gvrp all
no switchport gvrp all
all - All interfaces.
no - This command disables GVRP (GARP VLAN Registration Protocol) for all ports. If GVRP is disabled,
Join Time, Leave Time, and Leave All Time have no effect.
Default Setting
Disabled
Command Mode
Global Config
5.2.4.8 switchport gmrp
This command enables GMRP Multicast Registration Protocol on a selected interface. If an
interface which has GMRP enabled is enabled for routing or is enlisted as a member of a
port-channel (LAG), GMRP functionality will be disabled on that interface. GMRP
functionality will subsequently be re-enabled if routing is disabled or port-channel (LAG)
membership is removed from an interface that has GMRP enabled.
Syntax
switchport gmrp
no switchport gmrp
no - This command disables GMRP Multicast Registration Protocol on a selected interface. If an
interface which has GMRP enabled is enabled for routing or is enlisted as a member of a port-channel
(LAG), GMRP functionality will be disabled on that interface. GMRP functionality will subsequently be
re-enabled if routing is disabled or port-channel (LAG) membership is removed from an interface that has
GMRP enabled.
Default Setting
Disabled
Command Mode
To Next Page
Loading...
Need help?
General