Fortinet MR1 - Protocol Independent Multicast - Sparse Mode (PIM-SM) Commands; Show Commands; Show Ip Pimsm

410
Syntax
ip pimdm query-interval <10 - 3600>
no ip pimdm query-interval
<10 - 3600> - This is time interval in seconds.
no - This command resets the transmission frequency of hello messages between PIM enabled
neighbors to the default value.
Default Setting
30
Command Mode
Interface Config
7.5 Protocol Independent Multicast – Sparse
Mode (PIM-SM) Commands
7.5.1 Show Commands
7.5.1.1 show ip pimsm
This command displays the system-wide information for PIM-SM.
Syntax
show ip pimsm
Default Setting
None
Command Mode
Privileged Exec
Display Message
Admin Mode: This field indicates whether PIM-SM is enabled or disabled. This is a configured value.
Join/Prune Interval (secs): This field shows the interval at which periodic PIM-SM Join/Prune messages
are to be sent. This is a configured value.