567
8.2.3.10 Managing VRRP
Configuring VRRP
Configurable Data
VRRP Admin Mode - This sets the administrative status of VRRP in the router to active or inactive.
Select enable or disable from the pulldown menu. The default is disable.
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect immediately.
These changes will not be retained across a power cycle unless a save is performed.
Configuring Virtual Router
Selection Criteria
VRID and Slot/Port - Select 'Create' from the pulldown menu to configure a new Virtual Router, or
select one of the existing Virtual Routers, listed by interface number and VRID.
Configurable Data
VRID - This field is only configurable if you are creating new Virtual Router, in which case enter the
VRID in the range 1 to 255 .
To Next Page
Loading...
