327
None
Command Mode
Router OSPF Config
6.3.2.3 ip ospf
This command enables OSPF on a router interface.
Syntax
ip ospf
no ip ospf
<no> - This command disables OSPF on a router interface.
Default Setting
Disabled
Command Mode
Interface Config
6.3.2.4 1583compatibility
This command enables OSPF 1583 compatibility. Note that if all OSPF routers in the routing
domain are capable of operating according to RFC 2328, OSPF 1583 compatibility mode
should be disabled.
Syntax
1583compatibility
no 1583compatibility
<no> - This command disables OSPF 1583 compatibility.
Default Setting
Enabled
Command Mode
To Next Page
Loading...
Need help?
General