Fortinet MR1 - Logging Console; Logging Host

185
5.5.4.2 logging console
This command enables logging to the console.
Syntax
logging console [<severitylevel> | <0-7>]
no logging console
[<severitylevel> | <0-7>] - The value is specified as either an integer from 0 to 7 or symbolically through
one of the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4), notice (5),
informational (6), debug (7).
no - This command disables logging to the console.
Default Setting
None
Command Mode
Privileged Exec
5.5.4.3 logging host
This command enables logging to a host where up to eight hosts can be configured.
Syntax
logging host <hostaddress> [ <port>] [[<severitylevel> | <0-7>]]
<hostaddress> - IP address of the log server.
<port> - Port number.
[<severitylevel> | <0-7>] - The value is specified as either an integer from 0 to 7 or symbolically
through one of the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4), notice
(5), informational (6), debug (7).