Fortinet MR1 - Port-Channel Linktrap; Port-Channel Name

110
Default Setting
Disabled
Command Mode
Interface Config
5.2.6.5 port-channel linktrap
This command enables link trap notifications for the port-channel (LAG). The interface is a
logical slot and port for a configured port-channel. The option all sets every configured
port-channel with the same administrative mode setting.
Syntax
port-channel linktrap {<logical slot/port> | all}
no port-channel linktrap {<logical slot/port> | all}
<logical slot/port> - Port-Channel Interface number.
all - all Port-Channel interfaces.
no - This command disables link trap notifications for the port-channel (LAG). The interface is a logical
slot and port for a configured port-channel. The option all sets every configured port-channel with the
same administrative mode setting.
Default Setting
Enabled
Command Mode
Global Config
5.2.6.6 port-channel name
This command defines a name for the port-channel (LAG). The interface is a logical slot and
port for a configured port-channel, and name is an alphanumeric string up to 15 characters.
This command is used to modify the name that was associated with the port-channel when it
was created.
Syntax