Fortinet MR1 - Ip Vrrp Priority; Ip Vrrp Timers Advertise

377
Syntax
ip vrrp <1-255> preempt
no ip vrrp <1-255> preempt
<1-255> - The range of virtual router ID is 1 to 255.
<no> - This command sets the default preemption mode value for the virtual router configured on a
specified interface.
Default Setting
Enabled
Command Mode
Interface Config
6.9.2.6 ip vrrp priority
This command sets the priority value for the virtual router configured on a specified interface.
Syntax
ip vrrp <1-255> priority <1-255>
no ip vrrp <1-255> priority
<1-255> - The range of virtual router ID is 1 to 255.
<1-254> - The range of priority is 1 to 255.
<no> - This command sets the default priority value for the virtual router configured on a
specified interface.
Default Setting
The default priority value is 100.
Command Mode
Interface Config
6.9.2.7 ip vrrp timers advertise
This command sets the advertisement value for a virtual router in seconds.