244
None
Command Mode
Privileged Exec
5.11.1.18 clear tacacs
This command is used to clear TACACS configuration.
Syntax
clear tacacs
Default Setting
None
Command Mode
Privileged Exec
5.11.2 copy
This command uploads and downloads to/from the switch. Local URLs can be specified
using tftp or xmodem. The following can be specified as the source file for uploading from the
switch: startup config (startup-config), event log (eventlog), message log (msglog) and trap
log (traplog). A URL is specified for the destination.
The command can also be used to download the startup config or code image by
specifying the source as a URL and destination as startup-config or image respectively.
The command can be used to the save the running config to flash by specifying the
source as running-config and the destination as startup-config {filename}.
The command can also be used to download ssh key files as sshkey-rsa, sshkey-rsa2,
and sshkey-dsa and http secure-server certificates as sslpem-root, sslpem- server,
sslpem-dhweak, and sslpem-dhstrong.
Files upload to PC
Syntax
To Next Page
Loading...
