134
<0-160> - max connect time (Range: 0 -160).
no - This command sets the maximum connect time (in minutes) without console activity to 5.
Default Setting
5
Command Mode
Line Config
5.3.2.5 password-threshold
This command is used to set the password instruction threshold limiting the number of failed
login attempts.
Syntax
password-threshold <0-120>
no password-threshold
<threshold> - max threshold (Range: 0 - 120).
no - This command sets the maximum value to the default.
Default Setting
3
Command Mode
Line Config
5.3.2.6 silent-time
This command uses to set the amount of time the management console is inaccessible after
the number of unsuccessful logon tries exceeds the threshold value.
Syntax
silent-time <0-65535>
To Next Page
Loading...
