Fortinet MR1 - Queue Ip-Precedence-Mapping

293
5.14.2.2 queue ip-precedence-mapping
This command maps an IP precedence value to an internal traffic class on a "per-port" basis.
Syntax
queue ip-precedence-mapping <0-7> <0-6>
no queue ip-precedence-mapping
< 0-7 > - The range of IP precedence is 0 to 7.
< 0-6 > - The range of mapped traffic class is 0 to 6.
no - Reset to the default mapping of the IP precedence and the mapped traffic class.
Default Setting
None
Command Mode
Interface Config.
This command maps an IP precedence value to an internal traffic class for a device.
Syntax
queue ip-precedence-mapping all <0-7> <0-6>
no queue ip-precedence-mapping all
< 0-7 > - The range of IP precedence is 0 to 7.
< 0-6 > - The range of mapped traffic class is 0 to 6.
no - Reset to the default mapping of the IP precedence and the mapped traffic class.
Default Setting