Fortinet MR1 - Show Ip Traffic; Configuration Commands; Routing

312
Static: This field displays the static route preference value.
OSPF Intra: This field displays the OSPF intra route preference value.
OSPF Inter: This field displays the OSPF inter route preference value.
OSPF Ext T1: This field displays the OSPF Type-1 route preference value.
OSPF Ext T2: This field displays the OSPF Type-2 route preference value.
RIP: This field displays the RIP route preference value.
6.2.1.8 show ip traffic
This command displays IP statistical information. Refer to RFC 1213 for more information
about the fields that are displayed.
Syntax
show ip traffic
Default Setting
None
Command Mode
Privileged Exec, User Exec
6.2.2 Configuration Commands
6.2.2.1 routing
This command enables routing for an interface.
Syntax
routing
no routing
no - Disable routing for an interface.
Default Setting
Enabled
Command Mode
Interface Config