297
Command Mode
Interface Config.
This command activates the strict priority scheduler mode for each specified queue on a
device.
Syntax
queue cos-queue strict all <queue-id-0> [<queue-id-1> … <queue-id-6>]
no queue cos-queue strict all <queue-id-0> [<queue-id-1> … <queue-id-6>]
no - This command restores the default weighted scheduler mode for each specified queue on a
device.
Default Setting
None
Command Mode
Global Config.
5.14.2.6 queue cos-queue traffic-shape
This command specifies the maximum transmission bandwidth limit for the interface as a
whole. Also known as rate shaping, this has the effect of smoothing temporary traffic bursts
over time so that the transmitted traffic rate is bounded.
Syntax
queue cos-queue traffic-shape <bw>
no queue cos-queue traffic-shape
To Next Page
Loading...
