Fortinet MR1 - Page 204

204
Syntax
show port-security { <slot/port> | all }
Default Setting
None
Command Mode
Privileged Exec
Display Message
Intf Interface Number.
Interface Admin Mode Port Locking mode for the Interface.
Dynamic Limit Maximum dynamically allocated MAC Addresses.
Static Limit Maximum statically allocated MAC Addresses.
Violation Trap Mode Whether violation traps are enabled.
This command shows the dynamically locked MAC addresses for port.
Syntax
show port-security dynamic <slot/port>
Default Setting
None
Command Mode
Privileged Exec
Display Message
MAC address Dynamically locked MAC address.
This command shows the statically locked MAC addresses for port.
Syntax
show port-security static <slot/port>
Default Setting